CXRacing Twin Turbo + Intercooler Kit For 04-06 Pontiac GTO LS1 LS2

Twin T4 GT35 Turbo, Support 900-1000 WHP

This Kit is Developed from A 2004 GTO Chassis, Fits Stock Chassis with Only Few Modifications. Needs to Use 2004 GTO LS1 Radiator, Does NOT Fit 05-06 LS2 Radiator.

For RHD Holden Monaro, We Have Not Tested, But the Only Potential Issue Is the Right Side Downpipe Might Hit Steering Shaft. We've Considered This and Made the Downpipe As Much Possible to Avoid Fitment Problem.

Few Parts Need to Relocate Or Modify:
1. Battery Needs to Be Relocated to Back Trunk (Not Included, Can be Purchased Separately)
2. Coolant Reservoir Needs to Be Replaced with Smaller Tank (Included)
3. Left Side Behind Headlight Area Needs to Be Trimmed Slight to Fit Turbo Air Filter

Note:
1. This Kit Is For Turbo Hardware Kit ONLY. Fuel System Needs to Be Upgraded to Support the Boosted Application.
2. Stock LSx Motor Only Supports Around 400 WHP, Motor Internals Need to Be Upgraded to Support Bigger Power.
3. This Kit Is Designed for Advanced Users Who Know How to Install and Configure a Turbo. Off-Road Use ONLY.

Application:
- Chassis: 2004-2006 Pontiac GTO
- Motor: LS1, LS2

Product Being Sold:
Twin Turbo + Header + Downpipe + Wastegate + Intercooler Kit + Oil Line Kit

This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation.

Product Info and Spec:
Intercooler:
- Bar & Plate Aluminum Intercooler
- Core Size: 24"X7"X3.5"
- Overall Size: 27"x12.5"x3.5"
- Two 2.5" Inlet, One 3" Outlet
- 3.5" Thickness Core

Piping Kit:
- Mandrel Bent Aluminum Pipe
- 3" Cold Side and 2.5" Hotside Pipes
- Comes with 50mm BOV, Silicon Hoses, and T-Bolt Clamps

Turbo and Wastegate:
- T4 GT35 Twin Turbo
- 4" Air Inlet, 2.5" Compressed Air Outlet
- 3" Vband Exhaust Outlet
- Journal Bearing
- Oil and Water Cooled
- .70 A/R Compressor , .68 A/R Turbine for Fast Spool
- Dual 44mm Wastegate 8 PSI

Manifolds:
- 1.65" OD Runners
- Uses T4-To-3"Vband Stainless Elbow, Offers Better Fitment Flexibility
- Fits Factory Accessories, AC ETC.

Downpipe:
- 2.5" Enlarge to 3" Downpipe
- Downpipes Are Made Based on the Chassis We Had, They Are Built to Connect to the Appears Catback Position. See Pictures.

Notes:
- Off Road or Track Use ONLY, NOT for Street Use.
- Due to the Complexity of Swapping a Motor to Different Chassis, Please Make Sure that You Understand the Application Stated Here are the Right Parts for Your Project.
- Parts Being Sold are the Kit Being Advertised ONLY. Other Parts Shown on Pictures are for Demo Only (of Our Complete Swap Kit). Check Our Other Website Items.

Optional Two Dual Ball Bearing Turbos Are Available with $490 Extra, Please Select the Ball Bearing Option When Buying.

Highlights:
- Especially Designed, Made for the Application Stated
- Fully Tested, Simple Easy Installation
- Offers Excellent Performance Gains
- One of the Best Kits on the Market, with High Quality Products and Affordable Pricing

Items_Included:
- T4 GT35 Turbo x2
- 44mm Wastegate x2
- Bar & Plate Intercooler, With Mounting Brackets
- Aluminum Piping Kit with Hoses, Clamps, and BOV
- Headers (2 Pcs)
- Downpipe
- Oil Line Kit

Below Are Installation Pictures:

Click Below Picture to Play Installed Car Video


　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
　
See Below Modifications/Relocations