Our rear diffuser for the Toyota MR2 Spyder (ZZW30, 2000–2005).

Functional design: Unlike many diffusers that just trap air inside the bumper, our design gently leads air out from under the subframe to reduce drag.

Clears most exhausts: The folded aluminum construction was chosen to optimize strength, cost, heat resistance, and exhaust clearance.

Durable mounting: Steel braces and brackets are designed to be strong but flexible — if you manage to bend the diffuser, all you need to do is bend it back!

Made from 5052 aluminum and comes powder-coated satin black. Includes all hardware needed to install, however adjustments may be needed on individual cars to optimize drag reduction.

Vehicle-specific notes:

• The leading edge will need to be trimmed to clear the oil pan, depending on whether you have a 1ZZ, 2ZZ, or aftermarket baffled pan.
• Depending on your exhaust setup, you may need to trim the diffuser to clear exhaust piping. If the exhaust does not go below the rear subframe, you should be fine.
• 5 brackets are included for diffuser mounting. The forward two use existing holes. The rearward two require holes to be drilled and are adjustable for your specific placement needs.

Made to order — please allow 4–5 weeks for fulfillment. We will contact you to confirm details before shipment.