AudioControl D-6.1200 High-Power 6-Channel DSP Matrix Amplifier w/AccuBASS
Specifications
- Brand
- AudioControl
- UPC
- Category
- Car Audio Amplifier
- Shipping weight
- 8.5 lb
Links open in a new tab; return here to finish shopping. Select Klarna, Shop Pay or Sezzle to learn how they work before checkout. Eligibility applies.
AudioControl D-6.1200 adds amplification to an aftermarket car audio system. Review the power ratings, impedance, and electrical requirements below when planning your installation.
- Brand: AudioControl
- Manufacturer part number: D-6.1200
Features and product details
AudioControl has paired our award winning amplifier technology with our powerful Matrix DSP into the D-6.1200. This single-unit solution provides unprecedented power and tuning flexibility when you require audio perfection from your factory or aftermarket sound system.
The D-6.1200 features active speaker level inputs, line-level inputs and outputs plus, using AudioControl’s DM Smart DSP app gives you complete control over all features including 30 bands of equalization, signal delay, input delay, polarity and AudioControl proprietary features like AccuBASS®, GTOTMSignal Sense, and MILCTMplus integrated input and output RTA’s.
The built in Option Port on the D-6.1200 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions.
Perfect for OEM integration and aftermarket builds, the D-6.1200 packs power and intelligent flexibility into one beautiful cast aluminum chassis.
DM Smart App
Connect your laptop to the D-6.1200 using AudioControl’s DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor.
Route any input to any output, adjust gain, delay and polarity then precisely tune the D-6.1200 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers.
For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals.
With a clear GUI and intuitive workflow, AudioControl’s DM Smart DSP app will take the guesswork out of tuning your system to your exact specifications.
DM Smart App download
DM Smart App via Appstore iOS & Android
(*Note: Uninstall old DM software firmware before updating to the new version)
FEATURES
- Built-in DSP
- Configurable as 6/5/4/3 channel amplifier
- 6 x 200 watts @ 2 ohms
- 6 x 125 watts @ 4 ohms
- 400 watts @ 4 ohms bridged
- AccuBASS® Processing
- MILCTMMaximum Input Level Control (Patent Pending)
- GTOTMSignal Sense
- Active speaker-level inputs (8 channels) for OEM integration
- 6 preamp inputs
- 2 assignable preamp outputs
- Solid One-Piece Aluminum Chassis
- Input and Output RTA for precise and informed tuning
- Input and Output Delay
- 12 and 24 dB/octave Linkwitz-Riley crossovers
- 30 band equalizer
- OptionalACR-3remote for preset recall and level control
- OptionalAC-BT24Bluetooth Streamer/Programmer
- DM Smart DSPapp available indownloadsfor Mac/PC
SPECIFICATIONS
INPUTS
- Preamp Inputs: 6 balanced
- Preamp Input Voltage Range: 250 mV – 8 Vrms
- Speaker Level Inputs: 8
- Speaker Level Input Voltage Range: 3 V – 40 Vrms
OUTPUTS
- Rated Continuous (RMS) Power at 14.4V:
- 4 Ω – 125 W x 6 RMS
- 2 Ω – 200 W x 6 RMS
- Bridged 4 Ω – 400 W RMS
- Preamp Outputs: 2
- Maximum Preamp Output: 8.5 V RMS
PERFORMANCE
- Frequency Response: 20 Hz – 24 kHz
- Signal to Noise: 102 dBA, Ref 200 W @ 2 Ohm
- THD+N: < 0.1%
- Power / Ground Wire Gauge: 8 to 3 AWG wire
- Fuse Rating: 3 x 40 A
WEIGHTS & DIMENSIONS
- Dimensions: 12.0″W x 8.0″D x 2.1″H
- Weight: 7.1 lbs. (3.2 kg)
Specifications
| RMS Power | RMS Power 6 x 200W @ 2 ohms; 6 x 125W @ 4 ohms |
|---|---|
| Power Bridged | Power Bridged 3 x 400W @ 4 ohms bridged |
| Minimum Impedance | Minimum Impedance 2 ohms |
| Frequency Response | Frequency Response 10Hz - 30kHz |
| Signal-to-Noise Ratio | Signal-to-Noise Ratio 102 dB |
| THD | THD 0.01% |
| Input Voltage | Input Voltage 14.4v |
| High/Low Pass Crossover Freq | High/Low Pass Crossover Freq 25Hz-20kHz (DSP) |
Box contents
D-6.1200
6-Channel amplifier, Three 40A ATO fuses (installed), 2 Meter (6.5') USB 2.0 cable (Type A USB on one end / Micro-B USB on other end), 2.5mm Allen wrench, User Guide
What's in the box
D-6.1200
6-Channel amplifier, Three 40A ATO fuses (installed), 2 Meter (6.5') USB 2.0 cable (Type A USB on one end / Micro-B USB on other end), 2.5mm Allen wrench, User Guide
More from AudioControl
Explore these related options. Compare specifications and vehicle fitment when choosing an alternative or planning an installation.
Full details on shipping times, returns, warranty and cancellations are on our policy page.
Market conditions after 2020 have changed the landscape of automotive parts. Although we stock thousands of items across multiple warehouses and distribution channels, back-orders are unavoidable in today's market. If you need a product quickly, email, message or call us to check availability so we can explore your options.
Email Sales@Speedzoneweb.com
Call 407-846-8430
Text 407-749-6314
Answers to common questions are on our FAQ page.
Under the Influence by Speedzone
Product approval required
Want to promote this product?
Approved Speedzone creators can request access to promote this item.
Request to Promote This Product
Parts Financing
Product Request
Return Policy
Wheel & Tire Builder
Discount Codes
