The US Nissan 350Z pedals (18002-AM81E) are widely available in the US and are considered a excellent option for a R Chassis DBW conversion. Only problem is the US spec 350z pedals are offset for a LHD car and require the installer to bend the pedal assembly in order to fit a RHD car. We didn't like this so naturally, we created a billet aluminum bracket to relocate the pedal into the OEM position. During trial fitment we realized how much of a pain it was to remove and install while trying to line up bolts with your head upside-down under the dash so we decided to provide studs with our kit that will make installation a breeze.

V2 Updated Design Notes:

• We've complete redesigned the bracket and added a "ramp" to tackle the pedal angle issue on 350Z pedals. This added ramp, lifts the pedal higher off the floor giving more usable range during pedal calibration in the R32 Chassis.

What's included? 

• Billet aluminum pedal relocation bracket
  
• 2x stainless steel firewall studs
• 2x stainless steel nuts
• 2x bolts for the pedal

Fitment:

• Nissan Skyline R32

Note: Pedal and wiring plugs not included.

Nissan R Chassis Note: The 350z pedal assemblies have a pedal stop attached to the pedal bracket. This must be removed before installation as the relocation bracket will bring the pedal back in line with the oem R-Chassis firewall mounted pedal stop.