K-Swap Conversion Wiring Harness by Hybrid Racing

The Hybrid Racing Universal K-Series Swap Conversion Wiring Harness is designed for those people who have decided to install a K-Series engine into a non-honda chassis or a chassis where a standard plug and play conversion harness is not available. (such as Preludes, DA Integras, Accords, and older Honda chassis)

The race harness includes a fuel pump relay, a main relay and a primary oxygen sensor relay. The harness comes wired with the provisions for the OEM K-Series 02-04 Wideband o2 sensor and an OBD2 port. This harness has outputs including, tachometer, speedometer, low oil pressure warning, malfunction indicator, fan control, fuel pump control and for the starter relay. You will need to supply the harness with a constant 12v and switch 12v source.

When we construct a Hybrid Racing harness we utilize brand new connectors, terminals and wire sourced from the same company that Honda utilizes for their connectors. These connectors are ordered in bulk from Japan and ensure that you get all new parts. In addition, all new connectors decrease the chance for errors in the harness as we do not solder any of the joints. Every harness is machine made and human checked so they are issue free.

Features

• Universal K-Swap conversion harness!
• Brand new connectors and pins sourced from the same company Honda uses
• Powering 1000's of K-Swaps world wide!
• Nylon braided sleeving for safety and cleanliness
• New Connectors and Pins
  

Please Note:

• This harness does NOT work with any 05-06 OR K24 engine wiring harnesses.
• This harness is wired to use the factory wideband O2 sensor so European customers using the UKDM K20A/K20A2 wiring harness will need to convert the harness to use the narrowband type sensor.

Applications

• Universal K-Swap Applications

What's In The Box?

• 1 - K-Series Swap Conversion Wiring Harness
• Connectors and Pins

References

• Installation Instructions

Warranty

• Manufacturer Standard Warranty