2020–2021 Audi RS7 C8 Sportback ABT Style Front Bumper Canards – Dry Carbon Fiber

Add a sharp, track-inspired detail to the front bumper of your Audi RS7 C8 Sportback with these dry carbon fiber front bumper canards. Supplied as a handed pair in an ABT-style profile, they sit at the lower front corners to visually widen the front stance and give the RS7 a more aggressive, performance-focused forward presence.

Build

• Material: Genuine dry carbon fiber, autoclave cured using a 3D design and CNC moulding process for a tighter, more consistent weave and a superior strength-to-weight ratio compared to standard wet carbon or carbon-look alternatives
• Surface finish: High-gloss epoxy-polished top coat that holds its deep dry carbon appearance through sustained outdoor and driving exposure without fading or yellowing
• Configuration: Supplied as a handed pair (left and right) for a symmetrical installation across both lower front corners
• Weight: Lightweight at approximately 0.5 kg for the complete pair

Design & Finish

• ABT-style canard profile: Sharp, track-inspired fins at the lower front corners for a distinctly motorsport-derived look
• Aggressive stance: Visually widens the front end for a more purposeful, performance-focused forward presence
• Carbon aesthetic: Refined dry carbon weave and gloss finish complement the factory RS7 bodywork for a coordinated, motorsport-grade look

Fitment

• 2020–2021 Audi RS7 C8 Sportback (4-door)
• Fits the RS7 factory front bumper only — not compatible with aftermarket or non-RS7 bumper configurations
• Body style: Sportback (4-door) only
• Not compatible with the standard A7 or S7 front bumper

Package Contents

• 2 × dry carbon fiber front bumper canards (left and right)
• Pre-applied adhesive tape for installation

Installation

• No-drill, adhesive-mounted: Installs with the included adhesive tape — no drilling and no permanent modification to the factory front bumper
• Surface prep: Thoroughly clean, degrease, and dry the bumper at each canard position before fitting to ensure maximum adhesion
• Check orientation: The canards are handed — confirm correct left and right sides before final adhesion
• Professional installation recommended for the best positioning, symmetrical alignment, and finish

Before You Install

• Confirm your car is an RS7 C8 Sportback (2020–2021) before ordering
• Dry-fit both canards and measure from a fixed reference point on each side before adhesion — symmetry is highly visible on paired front-corner parts
• Canards sit low on the bumper and are exposed to road debris and kerbs — take care when parking nose-in
• Installation is reversible, but adhesive removal and re-prep may be required if pieces need repositioning