BMS M2C/M3/M4 S55 BMW Performance Intake is available through Speedzone Performance. Review the fitment, included parts and installation requirements below, then choose the exact option for your vehicle.

Gain up to 10+whp along with terrific sound

Finally, an affordable intake system worthy of your S55 BMW M2C, M3, and M4! The Burger Motorsports S55 BMW Performance Intake retains everything that's good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow ducting and quality inverted cone air filters to match.

During our dyno testing the BMS S55 BMW Performance Intake performed the same or better than other S55 intakes tested posting gains of up to 10+ horsepower to the wheels at 25psi+ boost levels. Note the OEM S55 air intake flows very well from the factory so gains are mostly present at higher boost levels and higher RPM where airflow requirements are highest. In addition to freeing up some power turbo spool speed was improved, and there is an incredible sound improvement. You'll finally be able to hear your turbo spooling!

Our intake temperature testing found no significant difference from the factory intake during both sustained cruise and full-throttle operation.

Installation is easy and fully reversible. Includes BMS proprietary high flow inverted cone filters that can be cleaned every 15-20k miles using an S&B cleaning kit and will last the life of the car.

Our Burger Motorsports inverted cone filters not only outflow your stock paper filter and last the life of your vehicle, they also include a built-in velocity stack. Velocity stacks allow even more air to be smoothly sucked into your intake system and are used in most racing applications.

Available in two finishes

• Matte Black
• Gloss Black Powder Coat (Elite)

Features & Benefits

• Adds up to 10+ Horsepower
• Dramatic sound improvement
• Super fast install and removal
• Improves throttle response
• Retains OEM airbox base as a heat shield
• Retains OEM cold air ducting
• Now available with red or blue filters
• Looks great under the hood
• Cleanable and reusable filters

Vehicle Fitment

BMW M2
• 2018-2021 F87 M2 Competition (S55 engine)

BMW M3
• 2015-2020 F80 M3

BMW M4
• 2015-2020 F82, F83 M4, GTS

What's Included
(2) BMS 3" aluminum intake tubes
(2) Renewable BMS inverted cone performance filters
(1) 3" coupler
(2) 3" clamps
(4) M4x0.7x14mm MAF screws

View manufacturer installation guide

Install Video

BMS Elite M3/M4 S55 Performance Intake ((Sound Clip)) on a 2015 M4

DYNO RESULTS

Manufacturer shipping restriction

This product cannot be shipped to California.

Confirm before you order

Check the listed model years, engine and chassis, and any required supporting parts. Installation instructions and manufacturer restrictions supplied above apply to the selected product.

Returns

This item is supplied through Burger Motorsports and is non-returnable. Confirm your vehicle, engine, model year and selected options before ordering. Contact Speedzone Performance if you need help checking compatibility.

Suggested supporting products

Check each product’s model year, engine, chassis and selected option before combining parts.

• S55 JB4 Tuner for 2015-2020 BMW M3/M4/M2C
• BMS M3/M4 S55 Aluminum Replacement Upgraded Charge Pipes
• BMW F Chassis Rear Mount CANbus Flex Fuel & Low Fuel Pressure Sensor Kit for N20, N55, & S55
• BMW S55 M2 M3 M4 Bluetooth Flex Fuel Kits for F Chassis
• BMS Elite M3/M4 S55 Replacement Upgraded Charge pipes
• BMS Oil Catch Can for S55 BMW M2C/M3/M4
• Phoenix Racing High Capacity Replacement S55 M3/M4 F8X M Intercooler