AudioControl EPIC4000 Monoblock Competition Amplifier, 4000W RMS
Specifications
- Brand
- AudioControl
- UPC
- 810194210075
- Category
- Car Audio Amplifier
- Shipping weight
- 0.0 lb
Links open in a new tab; return here to finish shopping. Select Klarna, Shop Pay or Sezzle to learn how they work before checkout. Eligibility applies.
AudioControl EPIC4000 adds amplification to an aftermarket car audio system. Review the power ratings, impedance, and electrical requirements below when planning your installation.
- Brand: AudioControl
- Manufacturer part number: EPIC4000
Features and product details
The AudioControl EPIC Series Amplifier delivers massive, heart-pounding bass in a thermally efficient design. Perfectly paired with The EPICENTER Bass Restoration Processor (sold separately), it enhances your bass experience to insane levels. The EPIC4000 is the definitive engine for competition-grade audio. Engineered for extreme efficiency and uncompromising stability down to the lowest impedances, this amplifier is built with oversized components and advanced thermal management to deliver its rated wattage reliably, not just on the bench, but deep into every demanding track. It’s not just about loudness; it's about converting colossal power into pure low-frequency output that dominates the sound stage and achieves legendary SPL scores.
FEATURES
• High-Power, Competition-Grade Class D: Experience high performance and thermal efficiency that delivers monster power to the most demanding subwoofer systems.
• High-Current Design – 1Ω Stable: Provides massive, stable power output necessary to drive the most demanding low-impedance speaker loads at 4000W RMS @ 1 ohm.
• Smart Auto-Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier should encounter an issue.
• 12 dB/octave Linkwitz-Riley Variable Low Pass & Subsonic Filters: Fine-tune your audio setup, matching your subwoofer’s frequency range for ground-shaking bass performance while protecting your subwoofers in vented enclosures.
• EPIC Boost Variable Frequency Bass Boost: Hear your bass slam with a variable frequency (30 to 80 Hz) bass equalizer with a boost range of 0 dB to +12 dB.
• Solid Power/Speaker Terminals with Hex Screws: Secures maximum current flow and signal integrity, ensuring low-resistance connections for consistent performance.
• EPICENTER Link: Simplify installation with the EPICENTER LINK (included) to seamlessly connect the EPIC amplifier and The EPICENTER bass restoration processor (sold separately) for an unbeatable bass experience and 1A fuse protection to safeguard your equipment.
• ACR-E Remote Level Control Included: Adjust your sound effortlessly with the included remote gain knob, giving you full control at your fingertips.
Install Requirements
• Two 0-gauge power wires and two 0-gauge ground wires are required for this amplifier to function. This amp is living the high-current lifestyle!
• Each 0-gauge power wire must have a 200-amp fuse installed within 12 inches
of its connection to the battery. This amp likes its fuse like it likes its bass: close and reliable.
• Use only high-quality 0-gauge OFC (oxygen-free copper) wire for all power
and ground connections. Keep your power clean and your bass mean!
• Do NOT mount the amplifier to subwoofer enclosures. These two like their personal space.
SPECIFICATIONS
Amplifier Topology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class D
Power Output RMS (14.4V, <1% THD). . . . . . . . . . . . . . . . . .1000 Watts @ 4 ohms
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2000 Watts @ 2 ohms
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4000 Watts @ 1 ohm
Frequency Response (+/- 1 dB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Hz - 190 Hz
S/N Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104.8 dBa, Ref 1000 Watts @ 4 ohms
Power / Ground Wire Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 AWG
Speaker Terminal Wire Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 AWG
Recommended Fuse Rating. . . . . . . . . . . . . . . . . . . . . 200 Amp x 2 / 400 Amps x 1
Low Pass Filter. . . . . . . . . . . . . . . . . . . 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz
Subsonic Filter. . . . . . . . . . . . . . . . . . . . . . 12 dB/octave Linkwitz-Riley, Off to 50 Hz
EPIC Boost. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 to 80 Hz, Gain: 0 to 12 dB
Line-level Inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 to 12 VRMS
Chassis Dimensions (LxWxH). . . . . . . . . . . . . . . . . . . . . . . . . . 21 in x 6.1 in x 2.04 in
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 533 mm × 155 mm × 52 mm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dimensions do not include connectors
IN THE BOX: EPIC4000 monoblock amplifier, wrench, screws, ACR-E remote level control and cable, THE EPICENTER LINK (1 meter harness), user manual
California Proposition 65
- To our California customers: Please view your Proposition 65 warning here.
Specifications
| Amplifier Topology | Amplifier Topology Class D |
|---|---|
| Power Output RMS | Power Output RMS 1000 W @ 4 ohms / 2000 W @ 2 ohms / 4000 W @ 1 ohm |
| Frequency Response (+/- 1 dB) | Frequency Response (+/- 1 dB) 10 Hz - 190 Hz |
| S/N Ratio | S/N Ratio 104.8 dBa, Ref 1000 Watts @ 4 ohms |
| Power / Ground Wire Gauge | Power / Ground Wire Gauge 0 AWG |
| Speaker Terminal Wire Gauge | Speaker Terminal Wire Gauge 8 AWG |
| Recommended Fuse Rating | Recommended Fuse Rating 200 Amp x 2 / 400 Amps x 1 |
| Low Pass Filter | Low Pass Filter 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz |
| Subsonic Filter | Subsonic Filter 12 dB/octave Linkwitz-Riley, Off to 50 H |
| EPIC Boost | EPIC Boost 30 to 80 Hz, Gain: 0 to 12 dB |
| Line-level Inputs | Line-level Inputs 0.5 to 12 VRMS |
| Install Requirement | Install Requirement Two 0-gauge power wires and two 0-gauge ground wires are required for this amplifier to function. |
| Install Requirement | Install Requirement Each 0-gauge power wire must have a 200-amp fuse installed within 12 inches of its connection to the battery. |
| Install Requirement | Install Requirement Use only high-quality 0-gauge OFC (oxygen-free copper) wire for all power and ground connections. |
| Install Requirement | Install Requirement Do NOT mount the amplifier to subwoofer enclosures. |
Box contents
EPIC4000
EPIC4000 monoblock amplifier, wrench, screws, ACR-E remote level control and cable, THE EPICENTER LINK (1 meter harness), user manual
What's in the box
EPIC4000
EPIC4000 monoblock amplifier, wrench, screws, ACR-E remote level control and cable, THE EPICENTER LINK (1 meter harness), user manual
More from AudioControl
Explore these related options. Compare specifications and vehicle fitment when choosing an alternative or planning an installation.
Full details on shipping times, returns, warranty and cancellations are on our policy page.
Market conditions after 2020 have changed the landscape of automotive parts. Although we stock thousands of items across multiple warehouses and distribution channels, back-orders are unavoidable in today's market. If you need a product quickly, email, message or call us to check availability so we can explore your options.
Email Sales@Speedzoneweb.com
Call 407-846-8430
Text 407-749-6314
Answers to common questions are on our FAQ page.
Under the Influence by Speedzone
Product approval required
Want to promote this product?
Approved Speedzone creators can request access to promote this item.
Request to Promote This Product
Parts Financing
Product Request
Return Policy
Wheel & Tire Builder
Discount Codes
