Our KTuner In-ECU tuning package comes with a single KTuner hardware unit paired with a single user license for the KTUNER SOFTWARE.  No tuning is included as you will need to go to a tuner to have your vehicle tuned. (PLEASE USE NOTES TO LET US KNOW KD YOIR  APPLICATION IS AUTO OR MANUAL AND PROVIDE YEAR, MAKE, MODEL INFO IN NOTES BEFORE CHECKOUT!)

• This unit is locked to one ECU and allows you to alter the settings in your ECU.
• Full reading, reflashing, and datalogging.
• On Board Logging (8MB) – RSX/Swap and Accord/TSX only as of 1/10/16
• Direct Flex Fuel input for ethanol content and temperature. RSX/Swap only as of 1/10/16
• Four (4) Analog inputs for 0-5 volt sensor signals. – All platforms.
• Two (2) Speed inputs for VR or HALL sensors. – All platforms.
• Peripheral port for Bluetooth, LCD displays, and additional add-ons.
• KTuner uses direct USB connectivity for fast data transfers.

Fitment:

• KTuner for 05-06 RSX Base and Type-S, 02-04 RSX, EP3, and Swap vehicles.

What’s required?

• Your factory 05-06 ECU can be physically modified by a dealer to accept our KTuner development hardware.
• You can also order a prepared 05-06 ECU from any of our dealers.

02-04 RSX, 03-05 EP3, and swap vehicles:

• If you’re using an 02-04 engine harness you will need a conversion harness to utilize the 05-06 ECUs our platform is built on. You’ll also need an 05-06 Front O2 Sensor to retain closed loop.

Will anything change?

• If using an ECU other than factory the immobilizer light on the dashboard will flash. You can disable the immobilizer in the software and unplug the immobilizer unit to prevent flashing on the dashboard or you can have the ECU sync’d to your immobilizer at any Honda/Acura dealer. *If you have already locked your KTuner unit to the ECU unlock it before they sync the immobilizer or tell them not to change the ECU VIN number. If they change the VIN number the KTuner unit will no longer communicate with the ECU if it’s locked to the previous VIN already.*

Suggested ECUs:
KTuner Swap ECU – This ECU has the following features
*Reverse lockout
*Extra inputs and outputs for use with features

PRB – This ECU has the following features
*Reverse lockout
PRB-A11 through A16 and PRB-306, PRB-405, PRB-415, PRB-425

PND – This ECU has the following features
*Intake Manifold Tuning Output which can also be retasked to reverse lockout
PND-A11 through A16 and PND-307, PND-405, PND-415, PND-425
PND-A61 through A66 and PND-416

PZD – This ECU has the following features
*Automatic ECUs can activate reverse lock functionality on manual vehicles
**Does not have IMT output
PZD-A06 and A07
PZD-A11
PZD-A56 and A57
PZD-A66 through A69
PZD-A71 and A72
PZD-A81 and A82